The VIVO Quad Pneumatic Monitor Mount is designed for a four-screen setup, combining two pneumatic side arms with fixed center brackets.
This VIVO Quad Pneumatic Monitor Mount review focuses on its screen compatibility, adjustment range, and the desk requirements to check before buying.
VIVO Quad Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsVIVO Quad Pneumatic Monitor Mount
A four-screen desk mount for buyers with compatible 17- to 32-inch monitors who want adjustable side arms and a clamp-on installation.
- Holds four monitors measuring 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes measuring 75 × 75 mm or 100 × 100 mm.
- Combines two pneumatic side arms with two fixed center brackets.
- Offers +90° to −90° tilt, 180° swivel, and 360° rotation on the adjustable arms.
Pros
- Supports a four-monitor layout from a single desk-mounted stand.
- Pneumatic side arms provide counterbalanced movement, with adjustable tension.
Consider before buying
- The center brackets are fixed, so buyers who want all four screens independently adjustable should consider whether this layout will work for them.
- The 17.6-pound limit applies to each screen; heavier monitors fall outside the stated capacity.
Read the full review summary
This mount brings four monitors onto one desk-mounted stand, with the two side arms using pneumatic springs for counterbalanced movement and the center brackets providing fixed positions.
Each screen can weigh up to 17.6 pounds, measure 17 to 32 inches, and use a 75 × 75 mm or 100 × 100 mm VESA pattern.
Its C-clamp fits surfaces up to 3.25 inches thick, so it can free up desk surface without requiring a drilled mounting hole.
It is best suited to workstations that need four screens and can use a fixed center pair alongside adjustable outer screens.
The listed tilt, swivel, and rotation ranges support changes to viewing angle and orientation, while spring tension can be adjusted for heavier or lighter displays.
Buyers should measure their desk, check each monitor's weight and VESA pattern, and decide whether fixed center positions fit their preferred layout.
The buying factors
VIVO Quad Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Four-screen capacity
Supports four monitors, with a per-screen weight limit of up to 17.6 pounds.
Screen compatibility
Fits 17- to 32-inch monitors with VESA 75 × 75 mm or 100 × 100 mm holes.
Arm adjustability
The side arms offer tilt, swivel, and full rotation, while the center brackets are fixed.
Pneumatic movement
Two pneumatic arms use counterbalancing springs, and their tension can be adjusted.
Desk mounting flexibility
A heavy-duty C-clamp attaches without drilling to a surface up to 3.25 inches thick.
Setup support
Step-by-step instructions and installation hardware are included.
Key Features and Specifications of VIVO Quad Mount
- Holds four monitors measuring 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes measuring 75 × 75 mm or 100 × 100 mm.
- Combines two pneumatic side arms with two fixed center brackets.
- Offers +90° to −90° tilt, 180° swivel, and 360° rotation on the adjustable arms.
- Allows spring tension to be increased for heavier screens or decreased for lighter ones.
- Uses a heavy-duty C-clamp for desk surfaces up to 3.25 inches thick.
- Includes assembly instructions and hardware, and carries a three-year warranty.
Pros and Cons of VIVO Quad Mount
Pros
- Supports a four-monitor layout from a single desk-mounted stand.
- Pneumatic side arms provide counterbalanced movement, with adjustable tension.
- Offers multiple ways to orient and angle the adjustable screens.
- Clamps to a desk without requiring a drilled mounting hole.
Consider before buying
- The center brackets are fixed, so buyers who want all four screens independently adjustable should consider whether this layout will work for them.
- The 17.6-pound limit applies to each screen; heavier monitors fall outside the stated capacity.
- The C-clamp is specified for surfaces up to 3.25 inches thick, which may rule out some desks.
Who Should Buy VIVO Quad Mount?
Good fit
Consider this mount if your workstation needs four monitors and your screens fall within its size, weight, and VESA limits.
The two pneumatic side arms add adjustable positioning, while fixed center brackets can make sense when you plan to keep the central displays in a stable arrangement.
Before choosing it, measure the desk edge where the clamp will sit and confirm that the surface is no thicker than 3.25 inches.
Check each monitor's weight and mounting pattern, then sketch the intended arrangement to see whether fixed center brackets and adjustable outer arms match how you work.
Who should skip it
Skip this mount if your monitors exceed 32 inches or 17.6 pounds each, or if they lack the specified VESA holes.
It also may not suit a setup where all four screens need independently adjustable arms, because the center brackets are fixed.
If your desk surface is thicker than 3.25 inches at the mounting point, this C-clamp's stated range will not fit. Check the desk before buying rather than assuming the clamp can accommodate it.
How the VIVO Quad Mount fits a four-screen desk
A layout with mixed movement
The design separates the two movable side arms from the fixed center brackets. That arrangement can suit buyers who want flexible positions at the outside of a four-screen setup but prefer the central pair to remain in place.
If you regularly rearrange every display, account for the fixed brackets before deciding.
Check the full compatibility checklist
Screen size alone does not establish fit: each monitor also needs a compatible 75 × 75 mm or 100 × 100 mm VESA pattern and must stay within the per-screen weight limit.
Confirm all four displays individually, especially if they differ in size or weight.
Pneumatic adjustment and positioning
The side arms use pneumatic springs to counterbalance the monitors, and the tension can be tuned for lighter or heavier screens.
Their tilt, swivel, and rotation ranges give buyers several ways to orient displays; the center brackets do not share the same movable-arm design.
Desk fit and installation
The C-clamp avoids drilling and accommodates desk surfaces up to 3.25 inches thick.
Measure the exact mounting location and check that the desk edge gives the clamp room to attach securely; the included hardware and instructions support assembly, but the desk's dimensions determine whether the mounting method fits.
Alternatives to VIVO Quad Mount
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO Quad Monitor Desk Stand STAND-V004F
Choose the pneumatic mount if you want a clamp-on setup and screens in the 17- to 32-inch range.
Consider the freestanding model if you prefer a base rather than a desk clamp and want adjustable arms with center-pole height adjustment, provided its smaller maximum screen size fits your monitors.
- This four-screen freestanding stand fits 13- to 30-inch monitors up to 17.6 pounds each.
- Its adjustable arms offer tilt, swivel, rotation, and height adjustment along the center pole; it has a 15.25 × 11-inch base.
- The VIVO Quad Pneumatic Monitor Mount fits 17- to 32-inch screens up to 17.6 pounds each and uses pneumatic side arms with fixed center brackets.
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO AeroPoise Dual Monitor Stand
The quad mount suits buyers who need four displays and accept fixed center brackets.
The AeroPoise is a better fit for a two-monitor workstation where both displays need adjustable arms and the lower screen count meets the setup's needs.
- The AeroPoise is a two-screen mount for 17- to 32-inch displays weighing 4.4 to 19.8 pounds each.
- It has mechanical spring adjustment, adjustable tilt, swivel, and rotation, and attaches with a C-clamp or optional grommet mount.
- The VIVO Quad Pneumatic Monitor Mount accommodates four screens, with two pneumatic side arms and fixed center brackets.
Is VIVO Quad Mount Worth It?
The VIVO Quad Pneumatic Monitor Mount is worth considering for a four-screen workstation with compatible monitors and a desk edge that fits its C-clamp.
Its pneumatic side arms, adjustable spring tension, and broad positioning range give the outer screens useful flexibility, while the fixed center brackets define the layout.
Check monitor weight, VESA pattern, and desk thickness before buying, and make sure the fixed center positions suit your routine. If those conditions fit, it offers a focused way to mount four screens on one stand.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsVIVO Quad Pneumatic Monitor Mount
A four-screen desk mount for buyers with compatible 17- to 32-inch monitors who want adjustable side arms and a clamp-on installation.
- Holds four monitors measuring 17 to 32 inches, each weighing up to 17.6 pounds.
- Requires VESA mounting holes measuring 75 × 75 mm or 100 × 100 mm.
- Combines two pneumatic side arms with two fixed center brackets.
- Offers +90° to −90° tilt, 180° swivel, and 360° rotation on the adjustable arms.