Product Reviews

SMALLRIG Universal Phone Holder Mount Review: A Flexible Camera Rig Option

A practical choice for creators who want to mount a range of phones on a camera or tripod and switch between portrait and landscape framing.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp for creators who want to position a smartphone on a camera or tripod and attach a light or microphone above it.

Its broad stated phone-width range and adjustable joints make it a flexible option, with a 500 g load limit to keep in mind when planning a rig.

SMALLRIG Phone Mount Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a range of phones on a camera or tripod and switch between portrait and landscape framing.

  • Accepts phones measuring 57–88 mm wide; check the phone with its case if you plan to leave it on.
  • Mounts through a 1/4-20 threaded hole or a cold shoe on the bottom.
  • Includes a top cold shoe for attaching a compatible microphone or light.
  • Rotates between landscape and portrait positions and locks at a 90-degree turn.

Pros

  • Fits phones across a 57–88 mm width range, giving buyers a clear measurement to check.
  • Offers both a bottom cold shoe and a 1/4-20 threaded mounting point.

Consider before buying

  • The 500 g load capacity calls for checking the combined weight of the phone and attached equipment.
  • The holder is the only included component, so compatible mounting gear and accessories need to be supplied separately.
Read the full review summary

The 4382 combines a phone clamp with mounting points suited to a small camera or streaming setup.

A 1/4-20 threaded hole and a cold shoe at the bottom provide two mounting routes, while the top cold shoe can hold an accessory such as a microphone or light.

Two rotary joints offer up to 180 degrees of adjustment, and the clamp can rotate between landscape and portrait orientation with a lock at 90 degrees.

Its stated compatibility is based on phone width, from 57 to 88 mm, rather than on a narrow list of models.

That makes it potentially useful across different phones, provided the device and any case fit within that range.

This is a straightforward phone holder rather than a complete filming kit: the package includes one holder, and the combined load should stay within 500 g.

The buying factors

SMALLRIG Phone Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Phone size range

The 57–88 mm width range covers a broad range of phones, though buyers should check their device with its case.

8/10

Mounting flexibility

A bottom cold shoe and 1/4-20 threaded hole support attachment to compatible camera or tripod setups.

8/10

Orientation changes

The holder supports landscape and portrait positioning and locks when rotated 90 degrees.

8/10

Framing adjustment

Two rotary joints provide up to 180 degrees of adjustment for positioning the phone.

7/10

Accessory integration

A top cold shoe and spaced threaded holes support accessories, but those accessories are not included.

6/10

Rig load headroom

The 500 g maximum is a useful limit to plan around when combining a phone and mounted accessories.

Key Features and Specifications of SMALLRIG Phone Mount

  • Accepts phones measuring 57–88 mm wide; check the phone with its case if you plan to leave it on.
  • Mounts through a 1/4-20 threaded hole or a cold shoe on the bottom.
  • Includes a top cold shoe for attaching a compatible microphone or light.
  • Rotates between landscape and portrait positions and locks at a 90-degree turn.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Spaced threaded holes are designed for compatible power bank holders; maximum load capacity is 500 g.
  • The package includes one phone holder; listed dimensions are 4.06 × 1.63 × 1.23 inches and weight is 73 g.

Pros and Cons of SMALLRIG Phone Mount

Pros

  • Fits phones across a 57–88 mm width range, giving buyers a clear measurement to check.
  • Offers both a bottom cold shoe and a 1/4-20 threaded mounting point.
  • Supports portrait and landscape use with a 90-degree locking position.
  • Top cold shoe and threaded holes provide options for building a compact phone rig.

Consider before buying

  • The 500 g load capacity calls for checking the combined weight of the phone and attached equipment.
  • The holder is the only included component, so compatible mounting gear and accessories need to be supplied separately.
  • The width limit may not accommodate a phone outside the 57–88 mm range, particularly with a bulky case.

Who Should Buy SMALLRIG Phone Mount?

Good fit

Consider the SMALLRIG Phone Mount if you want a phone clamp that can move between a camera and tripod setup, with both a 1/4-20 threaded connection and a cold shoe at the base.

Those mounting choices can make it easier to fit the holder into a rig that already uses either connection type.

It is also a reasonable fit for creators who change framing orientation or need to adjust the phone’s angle.

Before buying, measure the phone with its case and account for the weight of any mounted phone, microphone, light, or other gear against the 500 g limit.

The accessory points are most useful if your setup already includes compatible equipment.

The top cold shoe is intended for a microphone or light, while the spaced threaded holes are designed to facilitate installation of compatible power bank holders.

Who should skip it

Look elsewhere if your phone measures outside the 57–88 mm width range or if your planned combination of phone and accessories would exceed 500 g.

Check measurements and total load before relying on the holder for a particular setup.

This may be less suitable if you need a ready-to-use filming kit: the package contains the holder alone, so you will need a compatible camera or tripod connection and any accessories separately.

How the SMALLRIG Phone Mount Fits a Mobile Rig

Mounting choices for camera and tripod use

The bottom connection offers a 1/4-20 threaded hole and a cold shoe, giving the holder two ways to join a compatible support.

That makes it adaptable to existing camera or tripod equipment, though the right choice depends on the connection your rig provides.

Orientation and angle control

The holder supports landscape and portrait framing, with a lock at the 90-degree rotation point.

Its two rotary joints add up to 180 degrees of adjustment, which can help position the screen for a talking-head video, interview, livestream, or other phone-based recording.

Accessory planning and load

A top cold shoe provides a place for a compatible microphone or light, and the spaced threaded holes are intended to work with compatible power bank holders.

Since the maximum load is 500 g, consider the phone and attached equipment together before assembling a rig.

Phone fit deserves a quick measurement

The clamp’s stated 57–88 mm width range is a practical fit check, especially if you keep a case on the phone.

Confirm the phone’s width in the configuration you will use; a model name alone does not establish whether a particular case will fit.

Alternatives to SMALLRIG Phone Mount

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you want a width-based clamp that can accommodate phones beyond the specified MagSafe iPhone range.

The 5156 may suit a compatible MagSafe iPhone user who prefers magnetic attachment and wants its detachable top plate, while the listed note says external impacts may cause the device to detach.

  • The 5156 uses a detachable magnetic round plate designed for iPhones with MagSafe functionality.
  • It also offers a bottom 1/4-20 threaded hole or cold shoe, dual rotating shafts, multiple threaded holes, and a 500 g load capacity; its package includes an Allen wrench.
  • The 4382 uses an adjustable clamp designed for phones 57–88 mm wide and supports mounting through a 1/4-20 threaded hole or a bottom cold shoe.

Is SMALLRIG Phone Mount Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for a compact camera or tripod phone setup that needs flexible mounting, angle adjustment, and portrait or landscape framing.

Its width-based clamp and multiple connection points make it adaptable to a range of rigs.

Check phone width with its case and keep the combined load under 500 g before choosing it.

It includes the holder alone, so it is best for buyers who already have compatible support equipment and accessories or are prepared to add them.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a range of phones on a camera or tripod and switch between portrait and landscape framing.

  • Accepts phones measuring 57–88 mm wide; check the phone with its case if you plan to leave it on.
  • Mounts through a 1/4-20 threaded hole or a cold shoe on the bottom.
  • Includes a top cold shoe for attaching a compatible microphone or light.
  • Rotates between landscape and portrait positions and locks at a 90-degree turn.

Written by

travelreadymd.com Editorial Team

Editorial team

travelreadymd.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a range of phones on a camera or tripod and switch between portrait and landscape framing.

  • Accepts phones measuring 57–88 mm wide; check the phone with its case if you plan to leave it on.
  • Mounts through a 1/4-20 threaded hole or a cold shoe on the bottom.
Check Video Reviews on Amazon