Product Reviews

SmallRig Cold Shoe Mount 2060 Review

A practical two-pack for camera rig users who need to add a microphone, flash, or LED to compatible cages, handles, or plates.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review centers on a straightforward way to add accessory shoes to camera rigging with compatible threaded holes.

The two-pack is a useful fit for creators who want fixed mounting points for a microphone, flash, or LED without adding an adjustable arm.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera rig users who need to add a microphone, flash, or LED to compatible cages, handles, or plates.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm.
  • Aluminum alloy construction.
  • Designed to attach to accessories with 1/4-inch-20 or M2.5 threaded holes.
  • Intended to hold a microphone, flash, or LED on compatible camera accessories such as cages, handles, and plates.

Pros

  • Two mounts make it possible to add more than one accessory shoe or keep a spare.
  • Small footprint suits compact camera cages, handles, and plates.

Consider before buying

  • It provides a fixed mounting position, so buyers who need to tilt or reposition an accessory should choose an adjustable mount instead.
  • Compatibility depends on the rig’s threaded mounting point, and the described design excludes DJI and ZHIYUN gimbals.
Read the full review summary

Each compact aluminum mount attaches to a compatible 1/4-inch-20 threaded hole, with included screws for securing it to supported accessories.

The package includes two mounts, two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners, giving you hardware for more than one mounting position or a spare for another rig.

This design suits camera cage, handle, or plate setups where a simple fixed shoe is all you need.

Before buying, check the mounting point and accessory requirements: the description specifically rules out DJI and ZHIYUN gimbals, and notes that most cages use the included 1/4-inch-20 screw while the M2.5 screws are unnecessary.

A specific exception is listed for SmallRig Full Cage 1661.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The 1/4-inch-20 thread and included M2.5 screws provide options for supported threaded mounting points.

8/10

Accessory usefulness

The shoe is intended for common camera accessories such as microphones, flashes, and LED lights.

8/10

Pack value

Two mounts and their hardware can serve multiple compatible rig positions.

7/10

Setup simplicity

The arrows indicate mounting direction, while tightening requires the included screws and hex spanner.

6/10

Rig compatibility clarity

The description names compatible mounting types and gimbal exclusions, but buyers still need to verify their exact mounting point.

5/10

Positioning control

This is a fixed shoe mount; no angle-adjustment mechanism is described.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold shoe mounts are included, each measuring 25 × 25 mm.
  • Aluminum alloy construction.
  • Designed to attach to accessories with 1/4-inch-20 or M2.5 threaded holes.
  • Intended to hold a microphone, flash, or LED on compatible camera accessories such as cages, handles, and plates.
  • Two white arrows indicate mounting direction, and bent bevels at one end are designed to help prevent accidental removal.
  • Package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • The product is not suitable for DJI or ZHIYUN gimbals; the mounting instructions also identify a specific procedure for SmallRig Full Cage 1661.

Pros and Cons of SmallRig Shoe Mount

Pros

  • Two mounts make it possible to add more than one accessory shoe or keep a spare.
  • Small footprint suits compact camera cages, handles, and plates.
  • Includes the screws and hex spanners needed for the described mounting options.
  • Direction arrows and retaining bevels provide useful design cues during setup.

Consider before buying

  • It provides a fixed mounting position, so buyers who need to tilt or reposition an accessory should choose an adjustable mount instead.
  • Compatibility depends on the rig’s threaded mounting point, and the described design excludes DJI and ZHIYUN gimbals.
  • The included hardware and cage instructions vary by mounting setup, so check which screw type your accessory requires before installation.

Who Should Buy SmallRig Shoe Mount?

Good fit

Consider this two-pack if your camera cage, handle, or plate has a compatible threaded hole and you want a simple shoe for a microphone, flash, or LED.

The compact 25 mm square footprint can be useful when you want to add a mounting point without using a longer articulated support.

The included screws cover the mounting options described, and the two mounts give you flexibility to outfit separate positions.

Check your cage’s instructions and threaded hole before ordering, especially if you use the SmallRig Full Cage 1661, which has a specific note in the installation guidance.

Who should skip it

Skip this style if your setup uses a DJI or ZHIYUN gimbal, or if your mounting point does not match the supported threaded connections.

Choose a different design if you need an adjustable angle or a movable arm to position an accessory; this mount is presented as a fixed shoe.

How the SmallRig Shoe Mount Fits a Camera Rig

A direct route from threaded hole to accessory shoe

The core use is simple: screw the mount to a compatible hole on a cage, handle, or plate, then place a shoe-compatible accessory on it.

That makes it suitable for rigs that need an extra mounting point while keeping the overall arrangement compact.

Match the screw to the mounting point

The package includes both 1/4-inch-20 and M2.5 screws, but the supplied directions say most cages use the 1/4-inch-20 screw and do not require the M2.5 hardware.

Confirm the hole type and any cage-specific instructions before tightening the mount; the stated exception for Full Cage 1661 makes that check particularly relevant.

A fixed shoe favors straightforward setups

There is no described ball head or tilt adjustment, so the mount is best for an accessory that can sit in a fixed orientation.

If your framing or lighting position changes often, first consider whether a fixed point will work with your rig’s layout.

Use the compatibility limits as a buying check

The description expressly excludes DJI and ZHIYUN gimbals and names cages, handles, and plates as possible mounting locations when they have the appropriate threads.

Verify the exact accessory and mounting point before purchase, since a shared camera-rig category does not guarantee that every setup will fit.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 if you want two fixed shoe mounts for compatible threaded points. The 1135 is a closer fit when angle adjustment matters and a single articulated adapter meets your setup needs.

  • The Double Ball Head Adapter 1135 has a double ball head with 180-degree rotation, a side wingnut for securing its angle, a cold shoe, and a 1/4-inch screw.
  • It is one adapter, and its stated maximum weight recommendation is 1 kg; the description advises against monitors or LED lights over that limit.
  • The SmallRig Cold Shoe Mount 2060 is a compact, fixed shoe mount supplied as a two-pack for threaded rig mounting.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Cold Shoe Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Cold Shoe Mount 3577

The 2060 suits buyers who need multiple fixed shoe points. Consider the 3577 if you prefer a single lightweight mount with tilt adjustment, provided your device is within its stated 250 g support limit.

  • The Mini Ball Head 3577 weighs 20 g, tilts up to 138 degrees, and supports devices up to 250 g.
  • It has a 1/4-inch screw on top and a cold shoe adapter at the base for attachment to a camera or cage.
  • The 2060 is supplied as two fixed mounts that attach to compatible threaded points on a cage, handle, or plate.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering when you need compact, fixed accessory shoes for a compatible camera rig.

Its two-mount package and included hardware make it a practical option for adding a microphone, flash, or LED mounting point.

Confirm your threaded connection and cage instructions first, and avoid it for the excluded gimbal setups. If you need to change an accessory’s angle, a mount with an adjustment mechanism will better match that requirement.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera rig users who need to add a microphone, flash, or LED to compatible cages, handles, or plates.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm.
  • Aluminum alloy construction.
  • Designed to attach to accessories with 1/4-inch-20 or M2.5 threaded holes.
  • Intended to hold a microphone, flash, or LED on compatible camera accessories such as cages, handles, and plates.

Written by

travelreadymd.com Editorial Team

Editorial team

travelreadymd.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera rig users who need to add a microphone, flash, or LED to compatible cages, handles, or plates.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm.
  • Aluminum alloy construction.
Check Video Reviews on Amazon