This SmallRig 1138 camera clamp review looks at a compact mounting option for creators who need to position a camera, light, monitor, or microphone on a rod, tube, table, or frame.
Its dual ball head and included action camera adapter broaden how it can be used, while the 1.5 kg maximum load and dynamic-use safety-rope note matter when planning a setup.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp for creators who need to attach a lightweight camera accessory to a rod, tube, table, or frame without drilling.
- The dual ball head and clamp provide an adjustable mounting arrangement for compatible camera gear.
- A 1/4-inch-20 screw supports attachment of cameras, webcams, monitors, lights, microphones, action cameras, or other suitable equipment.
- The locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- The clamp is listed with a maximum weight capacity of 1.5 kg.
Pros
- Combines a clamp and dual ball head in one compact mounting setup.
- The 1/4-inch-20 connection and included action camera adapter support varied compatible gear.
Consider before buying
- The 1.5 kg maximum load may rule it out for heavier cameras, monitors, or multi-accessory configurations.
- Dynamic setups call for a separately attached safety rope, adding a step and another item to the rig.
Read the full review summary
The SmallRig 1138 combines a super clamp with a dual ball head and a 1/4-inch-20 screw. Clamp the assembly to a suitable support, then use the articulated head to position compatible gear.
The supplied action camera mount adapter adds another mounting route, so the kit can serve creators building a compact camera or content setup without drilling into a surface.
Its stated maximum load is 1.5 kg, making it a better fit for lightweight accessories than a rig that needs to carry heavier equipment.
Aluminum and stainless steel construction, non-slip threads, and an anti-twist design are intended to support a secure attachment.
For dynamic use, plan to attach a safety rope as advised, and check that the clamp fits the support and the head can accommodate your device.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp, dual ball head, 1/4-inch-20 screw, and action camera adapter offer several ways to build a compact mounting setup.
Device compatibility
The listed uses span cameras, action cameras, monitors, lights, microphones, webcams, and other compatible gear.
Position adjustment
The dual ball head is adjustable, giving users flexibility to aim mounted accessories.
Load capacity
The maximum load is 1.5 kg, which sets a clear limit for heavier equipment or combinations of accessories.
Material choice
Aluminum and stainless steel form the clamp's stated construction, with non-slip threads and an anti-twist structure included in the design.
Dynamic-use planning
The product can suit mobile setups, but the supplied guidance calls for a safety rope during dynamic use.
Key Features and Specifications of SmallRig 1138 Clamp
- The dual ball head and clamp provide an adjustable mounting arrangement for compatible camera gear.
- A 1/4-inch-20 screw supports attachment of cameras, webcams, monitors, lights, microphones, action cameras, or other suitable equipment.
- The locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- The clamp is listed with a maximum weight capacity of 1.5 kg.
- Aluminum and stainless steel construction is paired with non-slip threads and an anti-twist structure.
- The package includes a super camera clamp and an action camera mount adapter.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a clamp and dual ball head in one compact mounting setup.
- The 1/4-inch-20 connection and included action camera adapter support varied compatible gear.
- Can attach to rods, tubes, tables, frames, and tripods without drilling.
- The stated 1.5 kg maximum gives a concrete load limit for planning a light accessory setup.
Consider before buying
- The 1.5 kg maximum load may rule it out for heavier cameras, monitors, or multi-accessory configurations.
- Dynamic setups call for a separately attached safety rope, adding a step and another item to the rig.
- Before buying, compare your support's shape and dimensions with the clamp and check that your device uses a compatible connection.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if you want one clamp-based mount for a lightweight camera accessory and expect to attach it to a rod, tube, table, frame, or tripod.
The dual ball head provides angle adjustment, while the 1/4-inch-20 screw covers a range of compatible devices. Its included action camera adapter may also simplify a setup built around an action camera.
It makes most sense when the full rig stays within the stated 1.5 kg maximum and the chosen support offers a secure place for the clamp to grip.
For a moving setup, follow the safety-rope guidance and check the complete arrangement before use. Those checks help determine whether this compact mount fits the actual working environment.
Who should skip it
Skip it if your planned load exceeds 1.5 kg, or if your setup depends on equipment that cannot connect through the supplied mounting options. Choose a mount designed for the specific support and load instead.
It may also be a poor match when a moving camera rig cannot use the recommended safety rope or when the support surface does not give the clamp a suitable grip.
How the SmallRig 1138 Clamp Fits a Compact Rig
A clamp-based alternative to permanent mounting
The clamp is intended to attach to a rod, tube, table, frame, or tripod, and the product description specifies that drilling is not required. That gives creators flexibility to position gear on an existing support.
Before committing, check the support's dimensions and shape, then confirm that the locking knob can be reached and tightened where you plan to mount it.
The articulated head adds aiming options
The dual ball head lets users adjust the direction of compatible equipment after attaching the clamp. This can be useful when a fixed support is available but the camera, light, or microphone needs a different angle.
The exact position depends on the rig and device, so check for clearance around nearby parts before settling on a placement.
Keep the load within the stated limit
The maximum capacity is 1.5 kg, a key planning figure for choosing both the attached device and any accessories it carries.
Weigh the full mounted arrangement rather than considering the camera alone, and leave room for the safety rope recommended for dynamic scenarios.
If the total approaches or exceeds that limit, this is not the right clamp for the job.
A small kit with several connection routes
The 1/4-inch-20 screw is listed for a range of camera accessories, and the package also includes an action camera mount adapter. Together, these parts make the clamp relevant to compact video and desktop setups.
Check that your device and adapter mate correctly, since compatibility depends on the equipment's own mounting interface.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 2732 if you need the reach of a separate 9.8-inch arm and want 3/8-inch as well as 1/4-inch clamp threads.
The 1138 is the more direct option when its dual ball head and included action camera adapter suit the rig.
- The SmallRig 2732 pairs a super clamp with a 9.8-inch articulating arm.
- Its clamp accepts supports from 15 mm to 54 mm and includes 1/4-inch and 3/8-inch threads; the arm has 1/4-inch screws at both ends.
- The SmallRig 1138 combines a clamp, dual ball head, and 1/4-inch-20 screw, with a maximum load of 1.5 kg and an included action camera adapter.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 4103 is a stronger fit when a double-clamp arrangement or its higher stated load capacity better matches the setup.
For a single-point mount with a supplied action camera adapter, consider the 1138 and keep the complete load within its limit.
- The SmallRig 4103 has two adjustable clamps for mounting across supports, accommodates rods from 14 mm to 60 mm, and lists a maximum load of 3.5 kg.
- The SmallRig 1138 uses a single support clamp and is rated for a maximum load of 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for a compact, adjustable mount that can secure compatible lightweight gear to a rod, tube, table, frame, or tripod.
Its dual ball head, 1/4-inch-20 screw, and included action camera adapter make it a flexible option for small camera and creator setups.
Buy it when your support fits the clamp, your equipment connects to the available mount, and the complete load stays within 1.5 kg. For dynamic use, plan on the recommended safety rope.
If your rig needs a higher load capacity or a different mounting arrangement, choose a mount built for those requirements.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp for creators who need to attach a lightweight camera accessory to a rod, tube, table, or frame without drilling.
- The dual ball head and clamp provide an adjustable mounting arrangement for compatible camera gear.
- A 1/4-inch-20 screw supports attachment of cameras, webcams, monitors, lights, microphones, action cameras, or other suitable equipment.
- The locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- The clamp is listed with a maximum weight capacity of 1.5 kg.